Oticon RITE Power and Plus Domes
Overview
Pack of 10 domes - choose between Power domes in 8mm, 10mm or 12mm sizes or select the 'Plus Dome'
Measurements in mm refer to the widest section of the dome - i.e. the base of the dome. Plus domes are sometimes referred to as Tulip domes, and only come in one size. Our photos show the 10mm power dome option, and the Plus
Suitable for: Oticon RITE hearing aids manufactured before the 'Inium' chip platform. Examples include: Oticon Agil, Dual, Delta, Epoq, Vigo, Acto, Ino, Intiga.
(RITE stands for receiver-in-the-ear; and describes hearing aids that have a speaker in the ear with a thin wire joining the speaker to the rest of the casing behind the ear).
The RITE domes are not compatible with Oticon Corda thin tubings or the newer Oticon MiniFit receiver wires.
Please contact us if you need assistance working out which domes you need for your Oticon hearing aid.
Please read the following guidance and recommendations from Oticon regarding their accessories:
- Each of the Oticon range of tubes and domes has different acoustic properties and your hearing aid will have been specifically set up for use with a particular type.
- A dome should only ever be attached once – these are push fit – with a friction hold – if a dome ever looks as if it is loose or becomes detached a new dome should be applied.
- Only select the dome type/size that you currently have. Your ear has been measured for size, whilst your hearing aid has been acoustically programmed to match the dome selection.
- If you're not sure which ones you need, please dont guess, ask before placing your order.